diff --git a/board/freescale/mpc8641hpcn/Makefile b/board/freescale/mpc8641hpcn/Makefile
index 201da3e..e73e7ba 100644
--- a/board/freescale/mpc8641hpcn/Makefile
+++ b/board/freescale/mpc8641hpcn/Makefile
@@ -25,7 +25,7 @@
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	:= $(BOARD).o
+COBJS	:= $(BOARD).o law.o
 
 SOBJS	:= init.o
 
diff --git a/board/freescale/mpc8641hpcn/law.c b/board/freescale/mpc8641hpcn/law.c
new file mode 100644
index 0000000..245f420
--- /dev/null
+++ b/board/freescale/mpc8641hpcn/law.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000     0x7fff_ffff     DDR                     2G
+ * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
+ * 0xa000_0000     0xbfff_ffff     PCI2 MEM                512M
+ * 0xc000_0000     0xdfff_ffff     RapidIO                 512M
+ * 0xe200_0000     0xe2ff_ffff     PCI1 IO                 16M
+ * 0xe300_0000     0xe3ff_ffff     PCI2 IO                 16M
+ * 0xf800_0000     0xf80f_ffff     CCSRBAR                 1M
+ * 0xf810_0000     0xf81f_ffff     PIXIS                   1M
+ * 0xfe00_0000     0xffff_ffff     FLASH (boot bank)       32M
+ *
+ * Notes:
+ *    CCSRBAR don't need a configured Local Access Window.
+ *    If flash is 8M at default position (last 8M), no LAW needed.
+ */
+
+struct law_entry law_table[] = {
+#if !defined(CONFIG_SPD_EEPROM)
+	SET_LAW_ENTRY(1, CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
+#endif
+	SET_LAW_ENTRY(2, CFG_PCI1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+	SET_LAW_ENTRY(3, CFG_PCI2_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW_ENTRY(4, PIXIS_BASE, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
+	SET_LAW_ENTRY(5, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
+	SET_LAW_ENTRY(6, CFG_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
+	SET_LAW_ENTRY(7, (CFG_FLASH_BASE & 0xfe000000), LAW_SIZE_32M, LAW_TRGT_IF_LBC),
+#if !defined(CONFIG_SPD_EEPROM)
+	SET_LAW_ENTRY(8, CFG_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
+#endif
+	SET_LAW_ENTRY(9, CFG_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/cpu/mpc86xx/cpu_init.c b/cpu/mpc86xx/cpu_init.c
index 4f8956e..ab5906d 100644
--- a/cpu/mpc86xx/cpu_init.c
+++ b/cpu/mpc86xx/cpu_init.c
@@ -49,6 +49,10 @@
 	/* Clear initial global data */
 	memset ((void *) gd, 0, sizeof (gd_t));
 
+#ifdef CONFIG_FSL_LAW
+	init_laws();
+#endif
+
 	/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
 	 * addresses - these have to be modified later when FLASH size
 	 * has been determined
@@ -114,5 +118,8 @@
  */
 int cpu_init_r(void)
 {
+#ifdef CONFIG_FSL_LAW
+	disable_law(0);
+#endif
 	return 0;
 }
diff --git a/cpu/mpc86xx/spd_sdram.c b/cpu/mpc86xx/spd_sdram.c
index 54e40f1..bfea4b3 100644
--- a/cpu/mpc86xx/spd_sdram.c
+++ b/cpu/mpc86xx/spd_sdram.c
@@ -27,7 +27,7 @@
 #include <i2c.h>
 #include <spd.h>
 #include <asm/mmu.h>
-
+#include <asm/fsl_law.h>
 
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 extern void dma_init(void);
@@ -1179,12 +1179,16 @@
 		/*
 		 * Set up LAWBAR for DDR 1 space.
 		 */
+#ifdef CONFIG_FSL_LAW
+		set_law(1, CFG_DDR_SDRAM_BASE, law_size_interleaved, LAW_TRGT_IF_DDR_INTRLV);
+#else
 		mcm->lawbar1 = ((CFG_DDR_SDRAM_BASE >> 12) & 0xfffff);
 		mcm->lawar1 = (LAWAR_EN
 			       | LAWAR_TRGT_IF_DDR_INTERLEAVED
 			       | (LAWAR_SIZE & law_size_interleaved));
 		debug("DDR: LAWBAR1=0x%08x\n", mcm->lawbar1);
 		debug("DDR: LAWAR1=0x%08x\n", mcm->lawar1);
+#endif
 		debug("Interleaved memory size is 0x%08lx\n", memsize_total);
 
 #ifdef	CONFIG_DDR_INTERLEAVE
@@ -1239,12 +1243,16 @@
 		/*
 		 * Set up LAWBAR for DDR 1 space.
 		 */
+#ifdef CONFIG_FSL_LAW
+		set_law(1, CFG_DDR_SDRAM_BASE, law_size_ddr1, LAW_TRGT_IF_DDR_1);
+#else
 		mcm->lawbar1 = ((CFG_DDR_SDRAM_BASE >> 12) & 0xfffff);
 		mcm->lawar1 = (LAWAR_EN
 			       | LAWAR_TRGT_IF_DDR1
 			       | (LAWAR_SIZE & law_size_ddr1));
 		debug("DDR: LAWBAR1=0x%08x\n", mcm->lawbar1);
 		debug("DDR: LAWAR1=0x%08x\n", mcm->lawar1);
+#endif
 	}
 
 #if  (CONFIG_NUM_DDR_CONTROLLERS > 1)
@@ -1269,6 +1277,11 @@
 		/*
 		 * Set up LAWBAR for DDR 2 space.
 		 */
+#ifdef CONFIG_FSL_LAW
+		set_law(8,
+			(ddr1_enabled ? (memsize_ddr1 * 1024 * 1024) : CFG_DDR_SDRAM_BASE),
+			law_size_ddr2, LAW_TRGT_IF_DDR_2);
+#else
 		if (ddr1_enabled)
 			mcm->lawbar8 = (((memsize_ddr1 * 1024 * 1024) >> 12)
 					& 0xfffff);
@@ -1280,6 +1293,7 @@
 			       | (LAWAR_SIZE & law_size_ddr2));
 		debug("\nDDR: LAWBAR8=0x%08x\n", mcm->lawbar8);
 		debug("DDR: LAWAR8=0x%08x\n", mcm->lawar8);
+#endif
 	}
 
 	debug("\nMemory size of DDR2 = 0x%08lx\n", memsize_ddr2);
diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S
index ba899f6..8df27f7 100644
--- a/cpu/mpc86xx/start.S
+++ b/cpu/mpc86xx/start.S
@@ -283,8 +283,10 @@
 	bl      setup_ccsrbar
 #endif
 
+#ifndef CONFIG_FSL_LAW
 	bl	law_entry
 	sync
+#endif
 
 	/* run low-level CPU init code	   (from Flash) */
 	bl	cpu_init_f
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 985182f..55ed9a6 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -49,6 +49,7 @@
 #define CONFIG_PCI1		1	/* PCIE controler 1 (ULI bridge) */
 #define CONFIG_PCI2		1	/* PCIE controler 2 (slot) */
 #define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
+#define CONFIG_FSL_LAW		1	/* Use common FSL law init code */
 
 #define CONFIG_TSEC_ENET 		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE